WinSDR to Earthworm for EW Version 7.x Configuration File

Updated October 3, 2012 by Larry Cochrane

Below is a typical Ws2Ew.d configuration file. This file should be located in the \earthworm\run_working\params directory. The ModuleId must be added to the earthworm.d file also located in this directory.

#
#                    CONFIGURATION FILE FOR WS2EW
#                    -----------------------------
ModuleId         MOD_WS2EW_A    # Module id of this instance of Ws2Ew
OutRing          WAVE_RING      # Transport ring to write waveforms to
Host             10.0.0.10      # Host name or IP address of the system running WinSDR
                                # This parameter is not used in the Listen mode
Port             16064          # Port number to use when connecting to WinSDR
                                # or listening for WinSDR connections 
HeartbeatInt     15             # Heartbeat interval in seconds
AdcDataSize      2              # ADC trace buffer data size in bytes. Can be AUTO, 2 or 4 bytes
                                # AUTO = 2 bytes if digitizer is 16 bits, 4 bytes if 24 bit digitizer
#
#                        OPTION PARAMETERS
ListenMode       0              # If 1 listen for connections on port number specified above
SocketTimeout    60             # Socket timeout in seconds (default = 60)
RestartWaitTime  60             # Seconds to wait between reconnects (default = 60)
NoDataWaitTime   45             # Seconds to wait before resetting connection
SendAck          15             # Number of receive packets before sending ACK packet, 0 = don't send ACK
Debug            1              # Display debug information
#
ConsoleDisplay   0              # Windows Only; if 1 use console functions to redisplay status
ControlCExit     1              # If 1 exit on sigint control-c event
RefreshTime      30             # Auto Status Display Refresh Time in seconds, 0 = no status display
CheckStdin       1              # Windows Only; if 1 check for user input using kbhit() and then getch()
                                # to receive commands from the user. Currently the 'c' key
                                # clears the packet counter. All other input will redisplay the status information.
#
#     SCNL (Station/Component/Network/Location) for each channel configured in WinSDR to send out data
#          over the TCP/IP connection. Filter Delay is in milliseconds. 
#      Station Comp Net Loc Send FilterDelay
#      ------- ---- --- --- ---- -----------
Chan   CHAN1   BHZ  PN  01  YES     10
Chan   CHAN2   BHN  PN  02  YES     10
Chan   CHAN3   SHZ  PN  03  YES     20

WinSDR to Earthworm Overview